PA6-GF30 is glass fiber reinforced PA6 with an addition ratio of 30%. GF is the abbreviation of glass fiber, which refers to glass fiber, which is an inorganic filler commonly used in modified plastics.

PA6 has the characteristics of non-toxicity and light weight. It can be used everywhere in life. This material also has excellent mechanical strength, wear resistance and good corrosion resistance, and is an important engineering plastic. However, with the progress of the times, people have higher requirements for the performance of PA6, and people require products to have higher rigidity, heat resistance and fatigue resistance. PA6-GF30 is the result of modification of PA6. PA6-GF30 is reinforced by adding glass fiber. The glass fiber itself has the characteristics of temperature resistance, flame retardant, corrosion resistance, heat insulation, high tensile strength and good electrical insulation. After glass fiber reinforcement, PA6-GF30 products meet the requirements of everyone in industry and daily use, and have the characteristics of excellent strength, excellent heat resistance, excellent impact resistance and good dimensional stability.

In recent years, the automobile industry has undergone earth-shaking changes, and “replacing steel with plastic” has become the mainstream of the times. Plastic products need to have the characteristics of high strength and high heat resistance. PA6-GF30 products are stable at high temperature, have good mechanical properties, and are lightweight at the same time. They are widely used in automotive engine parts, electrical parts, body parts and airbags and other parts. It is recognized by major car manufacturers while maintaining the beauty of the vehicle.

The products we use PA6+GF30 materials are of very good quality. Because of the addition of glass fiber, as long as the process is adjusted, there will be no deformation and shrinkage. And the appearance of the product is also very nice.

PA is a general term for polyamide plastics, which all have amide groups in structure and have similar properties. Its general appearance is characterized by: it is a kind of tough, horny, yellowish transparent to opaque material. General nylon is a crystalline plastic, and there are also amorphous transparent nylons.

PA6, also known as nylon 6, is a translucent or opaque milky white particle with thermoplastic properties, light weight, good toughness, chemical resistance and durability. It is generally used in auto parts, mechanical parts, electrical and electronic products, engineering accessories, etc. product.

It has excellent wear resistance, self-lubrication and high mechanical strength. However, the water absorption is large, so the dimensional stability is poor.

The chemical and physical properties of PA6 are very similar to PA66, however, it has a lower melting point and a wide process temperature range. It has better impact and dissolution resistance than PA66, but is also more hygroscopic. Because many quality characteristics of plastic parts are affected by moisture absorption, this should be fully considered when designing products using PA6. In order to improve the mechanical properties of PA6, various modifiers are often added, and glass fiber is the most common additive. For products without additives, the shrinkage of PA6 is between 1% and 1.5%. Adding glass fiber additives can reduce the shrinkage to 0.3% (but slightly higher in the direction perpendicular to the process). The shrinkage of the molding assembly is mainly affected by the crystallinity and hygroscopicity of the material. Actual shrinkage is also a function of part design, wall thickness and other process parameters.

PA6 is one of nylon materials with relatively high mechanical strength, but lower than PA66; tensile strength, surface hardness and rigidity are higher than other nylon plastics. Impact resistance and flexibility are higher than PA66.

characteristic:
Reinforced grade, flame retardant grade, high temperature resistance, toughened grade, thermal stability, high rigidity, weather resistance, antistatic, standard grade, low temperature resistance, hydrolysis resistance, high strength.

advantage:

The mechanical commonality of PA is toughness, and they all have high surface hardness, tensile strength, impact resistance, fatigue resistance, and folding resistance.

PA has high wear resistance, self-lubricating, and noise.

PA is heat and cold resistant, and can also ensure high mechanical properties in cold and hot seasons

PA is resistant to chemicals and oil corrosion. Stress crack resistant.

PA is easy to print, easy to dye, and has excellent electrical properties.

Application range:

In industrial production, it is widely used in the manufacture of bearings, circular gears, cams, bevel gears, various rollers, pulleys, pump impellers, fan blades, worm gears, propellers, screws, nuts, gaskets, high-pressure sealing rings, oil-resistant sealing gaskets , oil-resistant containers, housings, hoses, cable jackets, shears, pulley sleeves, planer sliders, electromagnetic distribution valve seats, cold aging equipment, gaskets, bearing cages, various oil pipes on automobiles and tractors, pistons , ropes, transmission belts, zero fog materials for textile machinery and industrial equipment, as well as daily necessities and packaging films.