-
Niche Resins Sustainability in many niche markets | Plastics technology
Founded in 1987, Niche Polymer continues to grow both organically and through acquisitions, focusing its product development efforts on changing market needs. Adding value to industrial and post-consumer waste is an important part of these efforts. #sustainable development It seems that Dr. Saura...Read more -
Plastic shrinkage is the problem of plastic shrinkage
1. There are four kinds of plastic shrinkage: thermal shrinkage, phase change shrinkage, orientation shrinkage, compression shrinkage and elastic recovery. The shrinkage process consists of three parts: shrinkage before solidification of gate, cooling shrinkage and shrinkage after demoulding. 2. ...Read more -
Description and application of product coating
There are different names depending on the type of paint used, for example, the primer coat is called the primer coat, and the finish coat is called the finish coat. Generally, the coating obtained by coating is relatively thin, about 20~50 microns, and the thick paste coating can obtain a coati...Read more -
What is HIPS material
HIPS is the English abbreviation for impact resistant polystyrene resin, the main raw material is styrene, with high rigidity, high impact resistance, dimensional stability, easy to shape and process and many other characteristics, can be widely used in home appliances, instruments and instrument...Read more -
Which food grade plastics can be classified
Food-grade plastics are divided into: PET (polyethylene terephthalate), HDPE (high density polyethylene), LDPE (low density polyethylene), PP (polypropylene), PS (polystyrene), PC and other categories PET (polyethylene terephthalate) Common uses: mineral water bottles, carbonated beverage bottle...Read more -
Injection mould
1、 Definition of injection mold The mold used for plastic injection molding is called injection molding mold, or injection mold for short. The injection mold can shape plastic products with complex shape, precise size or inserts at one time. “Seven parts mold, three parts process”. ...Read more -
Is pmma acrylic?
PMMA is also called acrylic, are the English acrylic Chinese call, the translation is actually plexiglass. The chemical name is polymethyl methacrylate. Hong Kong people are mostly called acrylic, is an early development of an important thermoplastic, with good transparency, chemical stability an...Read more -
Polyacetal printing technology speeds up the product development cycle
This website is operated by one or more companies owned by Informa PLC and all copyrights are held by them. Registered office of Informa PLC: 5 Howick Place, London SW1P 1WG. Registered in England and Wales. No. 8860726. Polyplastics of Japan has developed a 3D printing technology for the product...Read more -
Some injection molding characteristics of PC/ABS/PE materials
1.PC/ABS Typical application areas: computer and business machine housings, electrical equipment, lawn and garden machines, automotive parts dashboards, interiors, and wheel covers. Injection molding process conditions. Drying treatment: Drying treatment before processing is a must. The humidity ...Read more -
ABS material properties
1. General performance ABS engineering plastic appearance is opaque ivory grain, its products can be colorful, and has a high gloss. The relative density of ABS is about 1.05, and the water absorption rate is low. ABS has good binding with other materials, easy to surface printing, coating and co...Read more -
Properties of PC/PMMA Composites
PC/PMMA composite film is a two-layer co-extrusion or three-layer co-extrusion material. The main substrate is PC, the two layers are PC+PMMA, and the three layers are PMMMA+PC+PMMA. It has the characteristics of high hardness and impact resistance. , folding resistance and other excellent prope...Read more -
Hot Sale 100% Food Grade Disposable Plastic Measuring Spoon
Read more
- 86-186-57428056
- candy@nbplasticmetal.com
