The slider of the plastic mold can generally be made of 45# steel, which is quenched and tempered to increase the wear resistance. The position of the inclined guide post can be in the front or in the back, which can be determined flexibly according to the size of the mold. However, the angle and length of the oblique guide column should be determined according to the moving distance of the slider; generally, the angle of the oblique guide column is 20° or 25°. Determining a fixed angle can facilitate the production of the oblique pad iron, so as to avoid the need for each time. To make inclined horns of different angles. Use the cosine law of trigonometric functions to calculate the length of the oblique guide post.

There are many types of surface treatment of the mold, the normal ones are smooth surface and pockmarked surface, which are the surface effects that need to be made according to the customer’s choice.
Any level of surface finish in our factory can be used.

The standard mold base means that the mold base is made of P20 material, and the mold is made of mirror frame technology. Generally used for export molds. The advantage of this use is that if there is a problem with the mold, it can be repaired simply by replacing the parts, which is better.